Satellite Locator AF1

[buck_21]

I purchase one of these and have no idea how to use it. Any and all help will be greatly appreciated. How would I use it to find 61.5

[harley_photo_guy]

Did it not come with instructions? I'm not familiar with that name, the way mine works is you connect the connector marked LNB to the dish, the other to the receiver. You should already have the dish azi, ele, and skew set and use the finder to fine tune the dish. Turn the knob until you hear a tone, then adjust the needle to about half way. Gradually turn the dish until the meter peaks out. Turn the knob until the needle is again about half way and adjust again. Repeat until no further gain is realized, then do the same with ele and skew. Do the western most sat first then the other one. To save myself climbing up and down to turn the receiver on and off, I hooked two 9volt batteries in series and connected them to a scrap piece of coax that had a connector on it. Red to center conductor, black to shield. This provides 18volts to the meter instead of having to use the receiver for power.

[el_lobito25]

You still need to conect receiver to lnb and tv at the begining to make sure you are pointed at correct satellite.

[akldjian]

Here is the instrucions I found for it. Hope it works well for you. Let us know how you like this gizmo.

Happy Testing