slaving question

[Mapleleaf69]

was wondering how and if you can slave a ariza 700 to a general instruments 2400r receiver. getting tired of hooking and unhooking the coax from the c-band to the ariza just to watch either receiver. thanks

[Gizz-Moes]

Not sure if this will help. I use a 4DTV 922 & Viewsat off the same C/Ku 10' dish, using a DC Pass splitter.
DC pass side of splitter to 922, other side to Viewsat. One splitter for C-band, another for Ku linear, no need to swap coax.
Good luck,
Gizz

[TeNn]

Originally Posted by Mapleleaf69

was wondering how and if you can slave a ariza 700 to a general instruments 2400r receiver. getting tired of hooking and unhooking the coax from the c-band to the ariza just to watch either receiver. thanks

try running the OUT TO TV cable from the general instruments 2400r receiver to the ANT IN on the ariza 700 then OUT TO TV. then when you turn the general instruments 2400r on you can watch c-band then turn it off to watch the ariza 700.

[dozerdozer]

I have been using a [ a/b] switch.